Lanier 2001 - Manual (Page 115)

Set Printer (2002 Only)
PC Printing & Scanning 5 - 7
GDI Enhance
Allows users to select the GDI printer driver which supports 600 dpi. Additional
memory is necessary for printing documents at 600 dpi.
Note: If your unit generates a “MEMORY FULL” report while attempting to
print a document using PCL4 emulation, or the Window GDI Driver and does not
print your document, your unit requires additional memory.
Note: Since the fax unit must be turned OFF when switching to PCL4 emulation
or Windows GDI Driver, make sure that any documents stored in memory are
printed out first.
1
Press the PROGRAM Key and scroll through the
menus until you reach the Set Printer menu and
press YES.
2
Press 7 or scroll down to the PCL4 Enhance menu
and press YES.
3
Select either ON or OFF depending on your needs.
Press YES to accept this data into memory.
4
If you chose YES, you must restart your unit to
make this change active.
SET PRINTER?
YES / or 1-8
8 GDI ENHANCE?
OK=YES
ON *OFF
-SELECT&PUSH”YES”-
PCL4/GDI CHANGE
RESTART YOUR FAX