Lanier 2001 - Manual (Page 133)

Class 1 Fax/Modem
PC Printing & Scanning 5 - 25
Printing in Class 1 Mode
To print a document to your unit from the PC-fax application. you must use the Class 1 ID
number as the destination. Enter the Class ID number exactly as it is programmed.
Follow these steps to use your unit as a printer:
1
In the PC-fax software application, enter the Class 1 ID number in the telephone
number field.
2
If the PC-fax software application allows, you can enter a single hyphen for the
phone number instead of the Class 1 ID number.
3
When your unit receives the destination telephone number (the Class 1 ID number)
from the PC, it recognizes the number as its own and prints the document instead of
forwarding it to another location.