Lanier 2001 - Manual (Page 176)

Setting Up Fax Unit
A - 6 Unpacking & Installation
Attaching the Power Cord and Telephone Cords
1
Make sure the Main ON/OFF Switch
is in the OFF position.
2
Connect one end of the Power Cord
to the Power Cord Receptacle on the
Fax unit.
3
Plug the other end into the wall
receptacle.
Note: Make sure the wall power
meets the specification for this unit.
4
Connect the Telephone line cable to
the LINE jack (lower of the two) on
the back of the Fax unit.
5
Connect the (Optional) Handset or
another external telephone to the
TEL jack (upper of the two) on the
back of the Fax unit.
Attaching the PC Cables
1
Insert the end of the Printer Cable
and/or RS-232 Cable into the
appropriate connectors on the back
of the Fax unit.