Lanier 2001 - Manual (Page 183)

Setting Up the (Optional) PFU
Unpacking & Installation A - 13
Installing the PFU
1
Take the (Optional) PFU from the
shipping carton.
2
Remove the vinyl bag and peel off
the shipping tape.
3
Remove the shipping tape and
cardboard from the gear area.
4
Remove any shipping material and
tape from the Cassette cavity.
CAUTION
Before proceeding, make sure the Main ON/OFF Switch on the Fax unit
is in the OFF position.
5
Place the Fax unit on top the PFU
making sure the three Aligning Posts
and the Power Connector are
carefully aligned.