Using the hook key – Lanier 2001 User Manual
Page 29
Sending a Document
Basic Operations
2 - 5
Using the HOOK Key
Use the HOOK dial sequence when it is necessary to listen to the “Handshake”. This is an
important troubleshooting aid to see if a transmission fault is phone related or not. It is
possible to dial a location using any combination of TEN-Key, One Touch Dial, or Speed
Dial Directories.
1
Place your document face down on the Document Feed Tray.
2
Adjust the Document Side Guides to the edges of the document.
3
Use the TYPE ORG. Key to select the desired contrast:
4
Use the RESOLUTION Key to select the desired resolution:
5
Press the HOOK Key.
6
Enter the remote fax number using one of the entry
methods.
7
listen until the remote fax unit answers, then press
the START Key.
8
To stop a transmission already in progress, press
the STOP Key.
7
HOOK
¡¯
TEL DIR
REDAIL
/PAUSE
GHI
PQRS
4
9
8
#
OPER
0
MNO
WXYZ
6
TUV
JKL
5
(7776665555)
-PUSH START KEY-