Lanier 2001 - Manual (Page 31)

Dialing Methods
Basic Operations 2 - 7
Dialing Methods
You can use the following methods to dial a remote facsimile number from your unit.
Use this setting for this
1. Key Pad Dial Dial the number of the remote facsimile using the numeric
keypad. You can also use the Arrow Key to correct any
mistakes. (A maximum of 30 digits are allowed, including the
“PAUSE” (P).
2. One Touch Dial Press a ONE TOUCH Key. Its number will be displayed and the
unit scans the document and dials the number automatically.
See the Advanced Operations.
3. Speed Dial Press the SPEED DIAL Key and enter a three-digit dial number
from the keypad. The Speed Dial number is shown on the
display. The unit scans the document and dials the number
automatically.
4. Group Dial Press a ONE-TOUCH Key. Any One-Touch Key can be
programmed for Group Dialing. The Group Name is shown on
the display. The unit scans the document and dials the
numbers automatically.
5. Program Dial Several transmission functions can be programmed in any of
the last eight One-Touch Keys. To utilize these functions, press
the corresponding One-Touch Key.
For example: if you want to set up an after-hours broadcast
which is performed regularly, you can register the necessary
functions in a Program Dial Key.
6. Using Combination
Dial If the One-Touch or Speed Dial phone number displays a “+”
as the last character, additional numbers are necessary to
complete the dialing. The additional numbers may be stored in
a One-Touch or Speed Dial location, or may be entered using
the key pad.
7. Using the TEL/DIR
Key The TEL/DIR function lists the One Touch and Speed Dial
locations stored in this unit. The LIST function enables you to
scroll through the list. The SEARCH functions enables you to
search a location alphabetically or numerically.
8. Using the “#” Key In most PBX applications, a prefix is necessary ahead of the
outside phone number in order to access an outside line. Once
this prefix number has been programmed into the machine,
pressing the “#” Key automatically enters it in the string.