Lanier 2001 - Manual (Page 46)

Polling TX
3 - 6 Advanced Facsimile
Polling TX
Polling TX allows you to set a document to be retrieved by a remote fax machine. Your
fax machine will automatically send the stored document in response to polling requests
from remote devices. You need to set a 4-digit security code to prevent unauthorized
polling.
Polling TX offers Single and Multi Modes.
•
In Single Mode, the specified file will be deleted after it has been successfully
transmitted.
•
In Multi Mode, the specified file has to be manually deleted during a polling TX
or by Cancel Reservation Session.
Note: You need to set a 4-digit security code to prevent unauthorized polling.
Contact your Key Operator to have this set up for you.
Procedure
1
Select the Original Type, Resolution if necessary
and place your document in the Document Feeder
face down.
2
Press the FUNCTION Key and press 5 to select the
Polling TX menu.
3
The following message appears briefly to confirm
your selection.
4
Enter the 4-digit Polling PW and press YES.
5
If you enter the wrong PW you are prompted and
then given an opportunity to enter the correct PW
number.
6
Select either Single or Multi and press YES to start
the Polling session.
7
Your document is scanned into memory, ready for
it to be polled. The “P” in the Message Display
indicated the Polling Document is in memory.
NOV.06 15:38 100%
-SET DOC. FACE DOWN-
FUNCTION
SEL. 1-7 OR FUNCTION
5 POLLING TX?
OK=YES
POLLING PW=_
OK=YES (DEL=NO)
*WRONG POLLING PW*
*SINGLE MULTI
-SELECT&PUSH”YES”-
NOV.06 15:38 100%
-SET DOC. FACE DOWN-