Lanier 2001 - Manual (Page 49)

Using Combination Dial
Advanced Facsimile 3 - 9
Using Combination Dial
Because the telephone number in each One-Touch and Speed Dial location is limited to 30
digits, it might be necessary to combine two or more One-Touch or Speed Dial locations to
call one location.
Procedure
1
Select the Original Type, Resolution if necessary
and place your document in the Document Feeder
face down.
2
Press any of the One-Touch or Speed Dial Keys
you have programmed.
3
The following messages appear briefly to confirm
your selection.
4
If the displayed number has a “+” as the last digit,
additional numbers must be used to dial this
locaiton.
5
At this point, you have the option to enter the additional numbers using the
Ten-Key Pad, selecting another One-Touch Key or entering another Speed Dial
number.
6
Enter your selection.
7
To begin transmitting, press START.
NOV.06 15:38 100%
-SET DOC. FACE DOWN-
ONE TOUCH 01
YES / or
ONE TOUCH 01
1234+
12345678
(TX=START)