Lanier 2001 - Manual (Page 50)

Using TEL DIR
3 - 10 Advanced Facsimile
Using TEL DIR
The following procedure illustrates how to use LIST or SEARCH to find the specified
location stored in your One-Touch or Speed Dial Keys. Once the correct destination is
displayed, press the START Key to transmit the document.
LIST Procedure
1
Select the Original Type, Resolution if necessary
and place your document in the Document Feeder
face down.
2
Press the TEL DIR Key. Use the Arrow Keys to
select the LIST option and press YES.
3
The first alphabetical listing appears. If this is the
desired location, press START to begin
transmitting. If it is not the desired location, use the
Up or Down Arrow Keys to locate the correct
location and then press START.
SEARCH Procedure
1
Select the Original Type, Resolution if necessary
and place your document in the Document Feeder
face down.
2
Press the TEL DIR Key. Use the Arrow Keys to
select the SEARCH option and press YES.
3
Type the name of the destination and press YES.
4
You may also use the Up and Down Arrow Keys to
step through the available locating.
5
Once you have found the desired location, press
START to begin transmitting.
NOV.06 15:38 100%
-SET DOC. FACE DOWN-
*LIST SEARCH
-SELECT&PUSH”YES”-
*DICK
OK=START
NOV.06 15:38 100%
-SET DOC. FACE DOWN-
LIST *SEARCH
-SELECT&PUSH”YES”-
SEARCH->>_
OK=YES
BILL (1)
SEARCH=YES (SEE= )