Lanier 2001 - Manual (Page 70)

Machine Operations
4 - 10 Facsimile Programming
3
Use the Left/Right Arrow Keys to select either ON
or OFF and press YES.
Selecting Remote Program
This function allows service personnel to change the unit’s firmware remotely. It is
possible for the Service Representative to change the unit’s firmware if this setting is
ON.
1
Press the PROGRAM Key and scroll through the
menus until you reach the Machine Operations
menu and press YES.
2
Press 6 or press the down arrow six times to reach
the Remote Program Menu. Press YES.
3
Use the Left/Right Arrow Keys to select either ON
or OFF and press YES.
Setting the Correct Dialing Type (Tone/Pulse)
Select either TONE or PULSE according to the type of telephone system connection to the
facsimile unit.
1
Press the PROGRAM Key and scroll through the
menus until you reach the Machine Operations
menu and press YES.
2
Scroll through the menu options until the TONE/
PULSE options appear and press YES.
ON *OFF
-SELECT&PUSH”YES”-
MACHINE OPERATION?
YES / or 1-7
6 REMOTE PROGRAM?
OK=YES
ON *OFF
-SELECT&PUSH”YES”-
MACHINE OPERATION?
YES / or 1-7
7 TONE/PULSE
OK=YES