Lanier 2001 - Manual (Page 75)

Document Scan Settings
Facsimile Programming 4 - 15
Rec. Paper Size
This function allows you to choose the recording paper size in Tray 1 (standard Paper
Tray) and the optional Tray 2 (PFU Paper Cassette) for the first printing after power ON.
After first printing the machine remembers the paper size in the Standard Tray and
Optional Paper Cassette.
1
Press the PROGRAM Key and scroll through the
menus until you reach the SCANNING &
PRINTING Menu. Press YES to begin
programming.
2
Press 5 or scroll down to the Rec. (Recording)
Paper Size menu and press YES.
3
Using the Left and Right arrows, select the size you
wish to have as the default and press YES to enter
this selection into memory.
Auto Cassette Sel.
Allows users to select the 2nd paper cassette to print out the document when the
facsimile is equipped with the 2nd paper cassette. Users can set the received FAX or
printed PC document to be printed out from either the Upper or Lower Tray.
1
Press the PROGRAM Key and scroll through the
menus until you reach the Set Printer menu and
press YES.
2
Press 1 or YES to enter the Auto Cassette Sel. menu.
3
Press YES to select Auto Cassette Selection.
Note: The Optional PFU must be installed. If it
is not installed, you will receive this message.
SCANNING&PRINTING?
YES / or 1-5
5 REC. PAPER SIZE?
OK=YES
A4 *LETTER LEGAL
-SELECT&PUSH”YES”-
SET PRINTER?
YES / or 1-8
1 AUTO CASS. SEL.?
OK=YES
*NOT AVAILABLE*