Lanier 2001 - Manual (Page 81)

Dial Registration
Facsimile Programming 4 - 21
7
Enter the Polling PW.
Once this function has been programmed, you use it by
simply pressing the One-Touch Key you have just
programmed. This is documented in Chapter 3 Advanced Facsimile.
For 7 = Relay Initiate:
5
A screen appears to confirm Relay Initiate was
your selection.
6
Select the One-Touch Key under which the remote
unit you wish to use as a Relay Station was entered.
7
Press YES to accept your entry or use the arrows to
select another.
Once this function has been programmed, you use it by
simply pressing the One-Touch Key you have just programmed. This is documented in
Chapter 3 Advanced Facsimile.
Edit/Deleting
1
If you wish to change any entry, a screen allows you to accept or change.
2
If you wish to change a Key that was previously
programmed, this message appears. Press YES to
keep this location as is, or NO if you wish to edit it.
3
If you choose NO, use the arrow keys to select
either EDIT or DELETE and then proceed with the
needed changes.
Batch TX
You can program your single location One-Touch Key to automatically batch
documents. By assigning a batch time to a programmed One-Touch Key, you can
eliminate repeated calls to the same number throughout the day. Your unit calls the
remote unit at a preset time and transmits all documents stored in memory for this
particular destination in one phone call.
POLLING PW-_000
OK=YES (DEL=NO)
RELAY INITIATE
-SEL. RELAY STATION-
ONE TOUCH 01
YES / or
REGISTERED! KEEP?
OK=YES (EDIT/DEL=NO)
EDIT *DELETE
-SELECT&PUSH”YES”-