Rx operation, Memory rx mode, Rx operation -27 – Lanier 2001 User Manual

Page 87: Memory rx mode -27

Advertising
background image

RX Operation

Facsimile Programming

4 - 27

RX Operation

Memory RX Mode

ON = Memory Lock

In Memory RX Mode, the machine stores all received documents in memory. The
document is not printed until the machine receives a print command.
The print command can be activated by a timer or password. The print timer command
instructs the machine to start printing the document stored in memory at the specified
time. The password print command, instructs the machine to start printing when a
password is entered.
A password print command can also be used to override the print timer command. If the
print timer command has been set and you want to print your incoming messages before
the set time, you can enter your password to print the document immediately.

Note: To set a password or to change you present one, contact your Key Operator
for assistance.

OFF

If the unit is set in the Memory RX Mode OFF status, then the received document will
be printed out directly instead of being stored in memory.

Case 1: If there is no data stored in the memory and the unit is set in OFF status, then the
received documents print out directly.
Case 2: If there is a document stored in the memory and the unit is set in OFF status,
then the previously received documents printed out first.

Note: You need to enter the correct password to print out the document if a
password has been previously set.

1

Press the PROGRAM Key and scroll through the
menus until you reach the RX Operation Menu.
Press YES to begin programming.

2

Press 1 or scroll down to the Menu RX Mode menu
and press YES.

3

Using the Left and Right arrows, select the option
you wish to have as the default and press YES to
enter this selection into memory.

RX OPERATION?

YES / or 1-9

1 MEM RX MODE?

OK=YES

ON *OFF

-SELECT&PUSH”YES”-

Advertising
This manual is related to the following products: