Lanier 2001 - Manual (Page 89)

RX Operation
Facsimile Programming 4 - 29
No. of Rings
The unit will answer an incoming call after the number of rings (1-16) set in this menu.
The default setting is 2 rings.
1
Press the PROGRAM Key and scroll through the
menus until you reach the RX Operation Menu.
Press YES to begin programming.
2
Press 2 or scroll down to the No. of Rings menu
and press YES.
3
Enter the number of rings you wish to have as the
default and press YES to enter this selection into
memory.
Two Page Print
With this function, you can set the facsimile to print two copies of a document.
1
Press the PROGRAM Key and scroll through the
menus until you reach the RX Operation Menu.
Press YES to begin programming.
2
Press 3 or scroll down to the Two Page Print menu
and press YES.
3
Using the Left and Right arrows, select the option
you wish to have as the default and press YES to
enter this selection into memory.
RX OPERATION?
YES / or 1-9
2 NO. of RINGS?
OK=YES
NO. of RINGS=_2
OK=YES (DEL=NO)
Choice Available Description
ON (Stack Mode) The facsimile will print copies of the document
without sorting the document.
ON (Sort Mode) The facsimile will print two copies of the document
and sort the document.
OFF The facsimile will print only one copy of the
document.
RX OPERATION?
YES / or 1-9
3 TWO PAGE PRINT?
OK=YES
ON ON(SORT) *OFF
-SELECT&PUSH”YES”-