Lanier 2001 - Manual (Page 95)

Line 2 Setting
Facsimile Programming 4 - 35
Line 2 Setting
The Optional Dual-Line kit allows you to connect one more telephone line to the fax
unit at the same time.
You can select either telephone line for priority reception, and you can also select which
line is to be used for priority sending when both lines are open.
Line 2 Fax No.
Register your second fax number. It’s operation is the same as entering it for Line 1.
1
Press the PROGRAM Key and scroll through the
menus until you reach the Set Printer menu and
press YES.
2
Press YES or 1 to select the first menu, Line 2 Fax
No. Press Yes.
3
Enter the telephone number of your second fax
line. Press YES to accept this data into memory.
TX Line Priority
This allows the user to determine the priority of the second line.
Note: The line 2 cannot be used for OFF HOOK TX/RX, or optional handset.
1
Press the PROGRAM Key and scroll through the
menus until you reach the Set Printer menu and
press YES.
LINE 2 SETTING?
YES / or 1-3
1 LINE 2 FAX NO.?
OK=YES
_
OK=YES
Choices Available Description
LINE 1 TX PRIORITY When both lines are read, transmission is sent on
line 1. If line 1 is busy and line 2 is read,
transmission is sent on line 2.
LINE 2 TX PRIORITY When both lines are read, transmission is sent on
line 2. If line 2 is busy and line 1 is read,
transmission is sent on line 1.
LINE 1 TX PROHIBIT Even if both lines are read, transmission is sent on
line 2. Line 1 is only available for receiving.
LINE 2 TX PROHIBIT Even if both lines are read, transmission is sent on
line 1. Line 2 is only available for receiving.
LINE 2 SETTING?
YES / or 1-3