Lanier 2001 - Manual (Page 96)

Line 2 Setting
4 - 36 Facsimile Programming
2
Press 2 or scroll down to the TX Line Priority menu
and press YES.
3
Select either 1 or 2 as the line you wish to transmit
on. Press YES to accept this data into memory.
Line 2 Tone / Pulse
This allows the user to set the dialing mode of line 2. It’s operation is the same of TONE/
PULSE setting for Line 1.
1
Press the PROGRAM Key and scroll through the
menus until you reach the Set Printer menu and
press YES.
2
Press 3 or scroll down to the Line 2 Tone/Pulse
menu and press YES.
3
Select either Tone or Pulse. Press YES to accept
this data into memory.
2 TX LINE PRIORITY?
OK=YES
LINE 1 TX PRIORITY?
OK=YES
LINE 2 SETTING?
YES / or 1-3
3 LINE2 TONE/PULSE?
OK=YES
*TONE PULSE
- SELECT&PUSH”YES”-