Lanier 2001 - Manual (Page 98)

Reports
4 - 38 Facsimile Programming
TX Results Report
A TX Results Report prints the results of a transmission after it has been completed. This
report can be used to check whether a transmission has been successful.
1
Press the PROGRAM Key and scroll through the
menus until you reach the Reports menu and press
YES.
2
Press 3 or scroll down to the TX Results Report
menu and press YES.
3
Use the Left/Right Arrow Keys to select either ON
or OFF and press YES.
RX Results Report
A RX Results Report prints the results after receiving a Confidential or Multi-Polling
document or when errors occur during reception. This report can be used to check whether
a reception by Mailbox or Multi-Polling has been successful.
1
Press the PROGRAM Key and scroll through the
menus until you reach the Reports menu and press
YES.
2
Press 4 or scroll down to the RX Results Report
menu and press YES.
3
Use the Left/Right Arrow Keys to select either ON
or OFF and press YES.
REPORTS?
YES / or 1-6
3 TX RESULTS REPORTX?
OK=YES
*ON OFF
-SELECT&PUSH”YES”-
REPORTS?
YES / or 1-6
4 RX RESULTS REPORT?
OK=YES
*ON OFF
-SELECT&PUSH”YES”-