Lexmark 3200 - Manual (Page 52)

Scan to FTP status
47
Scan to FTP status
Shortcut #xx EML
Destination Name
E-mail shortcut has been initiated by pressing #, and then entering the
shortcut number on the numeric keypad. Destination Name is the name
assigned to the e-mail destination.
Place Next
Or Stop
1 Place the next page on the flatbed.
2 Press Go/Send to continue sending pages.
3 Press Stop/Clear to end the scan.
The control panel resets to copy mode and the Ready message appears.
Message Description
SCAN
→
FTP
Destination name
Prompts you to select the FTP destination. Press Menu >
repeatedly until you see your FTP destination name on the
second line of the control panel display. Press Go/Send to start
scanning.
Connecting
Please Wait
Indicates the MFP is trying to make a connection with the FTP
server.
FTP
→
Destination
Busy
♦
100%
Indicates the MFP is scanning and sending the document.
Shortcut #xx FTP
Destination Name
FTP destination shortcut has been initiated by pressing #, and
then entering the shortcut number on the numeric keypad.
Destination Name is the name assigned to the FTP server
destination.
Place Next
Or Stop
1 Place the next page on the flatbed.
2 Press Go/Send to continue sending pages.
3 Press Stop/Clear when all pages have finished scanning.
The control panel resets to copy mode and the Ready status
message appears on the display.
S-cut Disabled Message appears on the second line of the display when a
shortcut is entered for a network scan function that has been
disabled.
One or all of the network scan functions (SCAN
→
PROFILE,
SCAN
→
EMAIL, and SCAN
→
FTP) can be disabled. See
your network administrator for assistance.
Shortcut not set Message appears on the second line of the display when an
invalid shortcut number is entered.
The list of configured shortcuts can be viewed or printed. See
“Print the shortcut list” on page 51.
Message Description