Lexmark 3200 - Manual (Page 8)

Examples of typical jobs
3
Job 5: enlarge copies
Enlarge a black-and-white drawing so you can see it better and make annotations.
1 Place the document on the flatbed of the scanner.
2 Press Enlarge. Hold down the button to rapidly increase the scaling factor.
3 Release the button when 125% appears on the control panel display. You may need to
experiment to get the copy just the way you want it.
4 Press Go/Send.
Job 6: document with color
Make copies of a one page letter-size document containing several small, color photographs.
1 Place the document on the flatbed of the scanner.
2 Press Content until the photo light is on, and then press Go/Send to print a copy.
Note: Photo mode is intended to be used to copy actual photographs or similar high
quality images. Photos printed on a printer should be copied using mixed mode.
3 Press Content until the mixed light comes on, and then press Go/Send to print a second
copy.
4 Compare the two copies to the original, and then decide which setting produces the best
quality of the photograph. Reset Content to the best choice (photo or mixed).
5 Enter the number of copies you want using the numeric keypad.
6 Return the page with the photograph to the scanner, and then press Go/Send.