LEI Electronics MAPCREATE 6 - Manual (Page 38)

34
Trail List Window
This window uses a text list format to show trails (imported from your
GPS) that are displayed on the Master Map. The name, number of
points in the trail, origin (starting point's latitude and longitude) and
trail number are listed. To open this window click
V IEW
| T RAIL L IST
. The
trail name can be edited in the window. To change the name:
1. Click on the name to highlight it.
2. Pause a moment, then click the name again. (This is not a regular
double-click.)
3. Type a new name and press Enter .
Trail List Window
Tip:
You can automatically create a route from a trail, and you can edit
the resulting route, if you wish. For more information, see
Create
Route From Trail in the online Command Reference. To convert a
trail, right-click the trail name. Then, in the pop-up menu, click
C
REATE
R
OUTE
F
ROM
T
RAIL
.
Moving Around the Master Map
Pan Arrows
You can move around the Master Map display by clicking the Pan
Arrow buttons, which appear at the north, south, east and west sides of
the Master Map. For example, click the
R
IGHT
P
AN
A
RROW
on the
east side of the window to pan or move the Master Map to the
left. Clicking on the Right Arrow reveals a portion of the map
previously out of sight to the right of the screen. The other three arrows
work in the same way.
NOTE:
You can always use the Pan Arrow buttons to move around the
Master Map, no matter what other commands may be activated.