LEI Electronics MAPCREATE 6 - Manual (Page 53)

49
along your intended route and click to create additional route
waypoints as needed. Basically, you will set a new waypoint every time
you need to change direction.
6. To close the Create Route command, right-click or press Esc .
Finished route with six waypoints. Notice the straight line-of-sight line
connecting the waypoints that make up the route. The route segment
from one waypoint to another is called a leg; this route has five legs.
Waypoints 3 and 4 are near oil drilling platforms and waypoint 5 is
near a visible wreck.
Tips:
• Routes can be edited in many ways, but those steps involve several
other commands that we will discuss only in the online Command
Reference section. You can delete an entire route, delete a waypoint
from a route, insert a waypoint into a route or relocate a waypoint
in a route. To read more about it, see these entries in the online
Command Reference:
View Route List, View Route Waypoint List,
Edit Route, Edit Route Waypoint, Delete Route, Delete Route
Waypoint, Insert Route and Insert Route Waypoints.