Lindy LF1TBELRG - Manual (Page 37)

LINDY CPU Switch Smart Installation and Use Page 30
4. LINDY CPU Switch Smart configuration
options
All the options described in this section are entered in LINDY CPU Switch Smart
configure mode - see section 2.6 for instructions on entering configure mode.
4.1 Screen saver time delay
LINDY CPU Switch Smart contains a programmable screen saver which will blank
the display after the set time delay with no keyboard or mouse activity. Simply typing
at the keyboard or moving the mouse will re-enable the display. The display will
flash whilst the LINDY CPU Switch Smart is in screen save mode.
B1 - screen saver disabled (default)
B2 - Blank screen after 1 minute of inactivity
B3 - Blank screen after 2 minutes of inactivity
B4 - Blank screen after 4 minutes of inactivity
B5 - Blank screen after 8 minutes of inactivity
B6 - Blank screen after 12 minutes of inactivity
B7 - Blank screen after 16 minutes of inactivity
B8 - Blank screen after 20 minutes of inactivity
4.2 Autoscan ‘lock on’ mode and delay time
LINDY CPU Switch Smart can be set to select each channel in turn for a period of
time set by the autoscan delay time. Autoscan mode is entered by typing the hotkey
keys together with ‘A’. By default, only those channels which have a powered up
computer connected to them will be scanned. Sometimes it may be desirable to
scan all channels, even if the attached computer is switched off (this will simply
show a blank screen when it is selected). All the LINDY CPU Switch Smart’s ports
will be scanned if option L2 is selected. Some applications may also require the
LINDY CPU Switch Smart to power on in autoscan mode. This feature can be
selected using the L3 or L4 options.