Lexmark 3400 Series - Manual (Page 30)

Load up to Make sure
20 sheets of banner paper
• You remove all the paper from the paper support before loading the
banner paper.
• You tear off only the number of pages needed to print the banner.
• You place the required stack of banner paper on the top cover.
• The leading edge of the banner paper feeds into the printer first.
• The paper is loaded against the right side of the paper support.
• The paper guide rests against the left edge of the paper.
• You have selected the correct paper size for the banner in Print
Properties. For more information, see “Using Print Properties” on
page 23.
Loading original documents on the scanner glass
You can copy, scan, and print photos, text documents, magazine articles, newspapers, and other publications. You
can also scan a document for faxing.
1 Make sure the printer is on.
2 Open the top cover.
3 Place the original document facedown on the scanner glass in the lower right corner.
4 Close the top cover to avoid dark edges on the scanned image.
30