Lexmark 4090-001 - Manual (Page 37)

Repair Information 4-5
4090-001
Note: During reassembly:
1. Be sure the small feed roll spring extensions [B] are in the
groves of the small feed roll arms.
2. Be sure the short extensions of the two paper flap springs are
trapped under the carrier frame [C].
Carrier Transport Motor Removal
1. Remove the front cover.
2. Disconnect the transport motor connector from the system
board.
3. Remove the belt from the transport motor pulley.
4. Remove the two screws securing the transport motor to the
carrier frame and remove the motor. Note the routing of the
motor cable.