Lexmark 436 - Manual (Page 131)

Menu item Description
Sides (Duplex)
On
Off
Enables duplex (two-sided) printing for incoming fax jobs
Note: Off is the factory default setting.
Fax Footer
On
Off
Prints the transmission information at the bottom of each page from a received fax
Note: Off is the factory default setting.
Max Speed
2400
4800
9600
14400
33600
Specifies the maximum speed in baud at which faxes are received
Note: 33600 (baud) is the factory default setting.
Block No Name Fax
On
Off
Enables blocking of incoming faxes sent from devices with no station ID specified
Note: Off is the factory default setting.
Fax Log Settings
Menu item Description
Transmission Log
Print log
Do not print log
Print only for error
Enables printing of a transmission log after each fax job
Note: Print log is the factory default setting.
Receive Error Log
Print Never
Print on Error
Enables printing of a receive error log following a receive error
Note: Print Never is the factory default setting.
Auto Print Logs
On
Off
Enables automatic printing of fax logs
Note: On is the factory default setting.
Log Paper Source
Tray <x>
Selects the source of the paper used for printing logs
Note: Tray 1 is the factory default setting.
Logs Display
Remote Station Name
Dialed Number
Specifies whether printed logs display the dialed number or the station name
Note: “Remote Station Name” is the factory default setting.
Enable Job Log
On
Off
Enables access to the Fax Job log
Note: On is the factory default setting.
Enable Call Log
On
Off
Enables access to the Fax Call log
Note: On is the factory default setting.
Understanding printer menus 131