37 insufficient memory to collate job, 38 memory full, 51 defective flash detected – Lexmark 436 User Manual
Page 181: 39 complex page, some data may not have printed
Try one or more of the following:
•
Press
to clear the message and continue printing.
•
Press
, and then press
to cancel printing.
•
Make sure the paper size setting matches the size of the paper in the tray.
35 Insufficient memory to support Resource Save feature
The printer lacks sufficient memory to save settings. Install additional memory, or press
to disable Resource Save
and continue printing.
37 Insufficient memory for Flash Memory Defragment operation
Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
to stop the defragment operation and continue
printing.
•
Delete fonts, macros, and other data in printer memory.
•
Install additional printer memory.
37 Insufficient memory to collate job
Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
to print the portion of the job already stored
and begin collating the rest of the print job.
•
Cancel the current print job.
38 Memory full
Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
to clear the message.
•
Cancel the current print job.
39 Complex page, some data may not have printed
Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
to clear the message and continue printing.
•
Cancel the current print job.
51 Defective flash detected
Try one or more of the following:
•
Replace the defective flash memory card.
•
Press the arrow buttons until Continue appears, and then press
to clear the message and continue printing.
Troubleshooting
181