Lexmark 436 - Manual (Page 118)

Network Card menu
Menu item Description
View Card Status
Connected
Disconnected
Allows you to ascertain whether the Network Card is connected.
View Card Speed Reflects the speed of a currently active network card.
View Network Address
UAA
LAA
Both addresses are represented by 12
‑digit hexadecimal numbers.
Job Timeout
0
‑225 seconds
Sets the amount of time in seconds that a network print job can take before it
is canceled.
Notes:
• 90 seconds is the factory default setting.
• A setting value of 0 disables the timeout.
• If a value of 1–9 is selected, the setting is saved as 10.
Banner Page
On
Off
Allows the printer to print a banner page.
Note: Off is the factory default setting.
TCP/IP menu
Use the following menu items to view or set the TCP/IP information.
Note: This menu is available only for network models or printers attached to print servers.
Menu item Description
TCP/IP
Activate
On
Off
Specifies whether to activate TCP/IP
Note: On is the factory default setting.
TCP/IP
View Hostname
Shows the current TCP/IP hostname
TCP/IP
IP Address
Netmask
Gateway
Lets you view or change the current TCP/IP Address, Netmask, and Gateway
information
Note: Each requires four fields.
Understanding printer menus 118