Solving copy problems, Copier does not respond, Check the display for error messages – Lexmark 436 User Manual
Page 190: Check the power, Scanner unit does not close, Poor copy quality
3
Press the arrow buttons until General Settings appears, and then press
.
4
Press the arrow buttons until Timeouts appears, and then press
.
5
Press the arrow buttons until Print Timeout appears, and then press
.
6
Press the arrow buttons until the value you want appears, and then press
.
Solving copy problems
Copier does not respond
These are possible solutions. Try one or more of the following:
C
HECK
THE
DISPLAY
FOR
ERROR
MESSAGES
Clear any error messages.
C
HECK
THE
POWER
Make sure the printer is plugged in, the power is on, and Ready appears.
Scanner unit does not close
Make sure there are no obstructions:
1
Open the scanner cover.
2
Remove any obstruction keeping the scanner unit open.
3
Close the scanner cover.
Poor copy quality
These are some examples of poor copy quality:
•
Blank pages
•
Checkerboard pattern
Troubleshooting
190