Solving option problems, Reset the printer, Make sure the option is installed – Lexmark 436 User Manual
Page 198: Make sure the option is selected, Drawers, Make sure the paper is loaded correctly
4
Click Analog Fax Setup.
5
In the Max Speed box, click on one of the following:
2400
4800
9600
14400
33600
6
Click Submit.
Solving option problems
Option does not operate correctly or quits after it is installed
These are possible solutions. Try one or more of the following:
R
ESET
THE
PRINTER
Turn the printer off, wait for about 10 seconds, and then turn the printer on.
C
HECK
TO
SEE
IF
THE
OPTION
IS
CONNECTED
TO
THE
PRINTER
1
Turn the printer off.
2
Unplug the printer.
3
Check the connection between the option and the printer.
M
AKE
SURE
THE
OPTION
IS
INSTALLED
Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not
listed, reinstall it.
M
AKE
SURE
THE
OPTION
IS
SELECTED
From the program you are using, select the option. Mac OS 9 users should make sure the printer is set up in the
Chooser.
Drawers
These are possible solutions. Try one or more of the following:
M
AKE
SURE
THE
PAPER
IS
LOADED
CORRECTLY
1
Pull the tray completely out.
2
Check for paper jams or misfeeds.
Troubleshooting
198