Reset the printer, Flash memory card, Solving paper feed problems – Lexmark 436 User Manual
Page 199: Paper frequently jams, Check the paper, Check the guides, The paper absorbed moisture due to high humidity, Paper jam message remains after jam is cleared
3
Make sure the guides are aligned against the edges of the paper.
4
Insert the tray.
R
ESET
THE
PRINTER
Turn the printer off, wait about 10 seconds, and then turn the printer on.
Flash memory card
Make sure the flash memory card is securely connected to the printer system board.
Solving paper feed problems
Paper frequently jams
These are possible solutions. Try one or more of the following:
C
HECK
THE
PAPER
Use recommended paper and other specialty media. For more information, see “Paper and specialty media
guidelines” on page 53.
M
AKE
SURE
THERE
IS
NOT
TOO
MUCH
PAPER
IN
THE
TRAY
OR
FEEDER
Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the
multipurpose feeder.
C
HECK
THE
GUIDES
Move the guides in the tray to the correct positions for the paper size loaded.
T
HE
PAPER
ABSORBED
MOISTURE
DUE
TO
HIGH
HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
Paper jam message remains after jam is cleared
The paper path is not clear. Clear jammed paper from the entire paper path, and then press
.
Page that jammed does not reprint after you clear the jam
In the Settings menu, Jam Recovery is set to Off. Set Jam Recovery to Auto or On:
1
Press
.
2
Press the arrow buttons until Settings appears, and then press
.
Troubleshooting
199