Gray background, Ghost images, The photoconductor kit is defective – Lexmark 436 User Manual
Page 202: Check the media type setting
Gray background
•
For Windows users: From Print Properties, select a different Toner Darkness setting before sending the job to print.
•
For Macintosh users: From the print options, Copies & Pages, or General pop
‑up menu, choose Printer Features,
and then choose the setting needed from the Toner Darkness pop
‑up menu.
•
From the printer control panel Quality menu, select a different Toner Darkness setting before sending the job to
print.
Ghost images
These are possible solutions. Try one or more of the following:
T
HE
PHOTOCONDUCTOR
KIT
IS
DEFECTIVE
Replace the photoconductor kit.
C
HECK
THE
M
EDIA
T
YPE
SETTING
•
For Windows users: From Print Properties, make sure the Media Type setting matches the paper loaded in the
tray.
•
For Macintosh users: From the Print dialog, make sure the Paper Type setting matches the paper loaded in the
tray.
•
From the printer control panel Paper menu, make sure the Paper Type setting matches the paper loaded in the
tray.
Troubleshooting
202