Make sure the fill pattern is correct, Check the paper type, Embedded web server does not open – Lexmark 436 User Manual
Page 209: Check the network connections, Check the network settings
Solid black or white streaks appear on transparencies or paper
These are possible solutions. Try one or more of the following:
M
AKE
SURE
THE
FILL
PATTERN
IS
CORRECT
If the fill pattern is incorrect, choose a different fill pattern from your software program.
C
HECK
THE
PAPER
TYPE
•
Try a different type of paper.
•
For transparencies, use only ones recommended by the printer manufacturer.
•
Make sure the Paper Type setting matches what is loaded in the tray or feeder.
•
Make sure the Paper Texture setting is correct for the type of paper or specialty media loaded in the tray or
feeder.
M
AKE
SURE
THE
TONER
IS
DISTRIBUTED
EVENLY
IN
THE
TONER
CARTRIDGE
Remove the toner cartridge and shake it from side to side to redistribute the toner to extend the life of the cartridge,
and then reinstall it.
T
HE
TONER
CARTRIDGE
MAY
BE
DEFECTIVE
OR
LOW
ON
TONER
Replace the used toner cartridge with a new one.
Embedded Web Server does not open
These are possible solutions. Try one or more of the following:
C
HECK
THE
NETWORK
CONNECTIONS
Make sure the printer and computer are turned on and connected to the same network.
C
HECK
THE
NETWORK
SETTINGS
Depending on the network settings, you may need to type https:// instead of http:// before the printer IP
address to access the Embedded Web Server. For more information, see your system administrator.
Troubleshooting
209