Lexmark 436 - Manual (Page 50)

3 Feed paper into the manual feeder only to the point where its leading edge can contact the paper guides.
4 Adjust the paper guides to the paper width.
Warning—Potential Damage: Do not force the paper into the feeder. Forcing the paper causes jams.
Paper capacities
The capacities of the trays and feeders are based on 75 g/m 2 (20 lb) paper.
Load up to Notes
Tray 1
250 sheets of paper
150 sheets of A6
‑size paper
50 paper labels
50 transparencies
Vinyl, pharmacy, or dual
‑sided labels are not supported. Use paper
labels only. Single
‑sided paper labels designed for laser printers are
supported for occasional use. It is recommended to print no more
than 20 pages of paper labels per month.
Tray 2
250 or 550 sheets of paper
50 paper labels
Only one optional drawer may be installed on the printer at a time.
The maximum amount of paper that can be loaded depends on
whether you have an optional 250
‑ or 550‑sheet tray.
Multipurpose feeder
50 sheets of paper
15 paper labels
10 transparencies
10 sheets of card stock
7 envelopes
Feed paper into the multipurpose feeder only to the point where
its leading edge can contact the paper guides. Do not force the paper
into the feeder.
Manual feeder
1 sheet of paper
1 sheet of paper labels
1 transparency
1 sheet of card stock
1 envelope
Depending on your printer model, you have either a multipurpose
feeder or a manual feeder.
Loading paper and specialty media 50