Lynx L-325 - Manual (Page 27)

4-Port ADSL Router Lynx L-325
User Manual
26
Version 1.0
Document #: BD-AU0007-10
After selecting the Finish button, the below screen will appear. At
this point, the router will reboot to save the changes made.
LAN Local Area Network (LAN) Setup
You can configure the DSL Router IP address and Subnet Mask
for the LAN interface to correspond to your LAN’s IP Subnet. If
you want the DHCP server to automatically assign IP addresses,
then enable the DHCP server and enter the range of IP addresses
that the DHCP server can assign to your computers. Disable the
DHCP server if you would like to manually assign IP addresses.
Click on Next to continue. The Save button only saves the LAN
configuration data, but does not apply the configurations. Select
the Save/Reboot button to save the LAN configuration data and
reboot the router and apply the new configurations.