Lynx L-325 - Manual (Page 39)

4-Port ADSL Router Lynx L-325
User Manual
38
Version 1.0
Document #: BD-AU0007-10
If you do not want to enable Automatic Assigned Default Gateway ,
then uncheck the box as seen below. You will be given the
choice to use the default gateway IP address. If you decide to
change the automatic assigned default gateway address, you
must reboot the router to be assigned a new default gateway IP
address. Also, select the WAN interface that you will be using.
Click on Save / Apply to save the settings.
Static Route
Use the Routing – Static Route screen to add a static route to the
routing table.
Enter the route information and click on Save/Apply to make it
active. No reboot is required.