Lexicon Converter - Manual (Page 12)

7
Controls and Connectors 20/20 AD User Guide
AES/EBU
Digital Output This interface requires balanced connections using high-quality, low-capaci-
tance, controlled-impedance, data communication, twisted-shielded pair cable.
Microphone cable may introduce a significant amount of jitter into the
signal, causing distortion.
Use commercially-available, consumer audio optical cable assemblies.
This interface is unbalanced but, because it carries digital signals, it requires the
use of 75
Ω
RG-59 coaxial cable.
Below are recommended cable and cable assemblies. Similar cables from
sources other than those listed here may be appropriate.
AES/EBU
Belden 9271 (foil shielded twisted pair, 124
Ω
, 12.2 pF/ft)
Gotham Audio GAC-2 (shielded twisted pair)
S/PDIF Consumer Digital Audio
Belden 9259 (RG-59/U: 22 AWG conductor, .242 O.D., 75
Ω
, 17.3 pF/ft)
Belden 8218 (27 AWG conductor, .150 O.D., 75
Ω
, 20.5 pF/ft)
Maximum recommended length: 32 ft. (10M)
S/PDIF Consumer Digital Audio Optical
Toshiba TOCP174y
Sony POC-15
Maximum recommended length: 16 ft. (5M)
Word Clock
Belden 9259 (RG-59/U: 22 AWG conductor, .242 O.D., 75
Ω
, 17.3 pF/ft)
Belden 8218 (27 AWG conductor, .150 O.D., 75
Ω
, 20.5 pF/ft)
Maximum recommended length: 32 ft. (10M)
Cables
S/PDIF
Consumer Digital Audio
Output
Word Clock I/O