Lexicon Converter User Manual

Page 9

Advertising
background image

Lexicon

4

Controls and Connectors

Synchronization and

Output Formatting

Alternate Modes

SAMPLE RATE
Selects the sample rate of
the A/D conversion. This
switch should be set to the
same sample rate as your
sync source. When Word
Clock is selected as an exter-
nal sync source, the AES
Channel Status Sample Rate
bit will be set to the sample
rate value you have selected
here.

(The PL DN setting of this
switch is reserved for future
enhancements.)

EXT SYNC
This switch allows selection
of: Internal mode (unlit),
Word Clock source, or AES
source. This is for sync
source

only. See ALT-EXT

SYNC below for digital audio
input.

AES/WC
In internal sync mode, PRES
indicates that

either WC or

AES is available at the inputs
as a sync source.

In external sync mode, PRES
indicates that the

selected

sync source is present at the
input connectors.

DITHER

FORMAT

AES / WC:

SAMPLE RATE

EXT SYNC

WIDE

HF

48

AES

WC

PRES

20 BIT

PL DN

44.1

SPDIF

AES

LOCK

LOCK lights in external sync
mode to indicate the unit has
successfully locked to the in-
coming signal (WC or AES).

DITHER
Selects the type of dither:
wide bandwidth, 20 bit, or
High Frequency .

FORMAT
Selects the format to be
available at the output con-
nectors, AES or S/PDIF.

Note: The format selected
here will be sent to

all out-

puts.

1dB SCALE

ALT

4 CHAN

~

DISPLAY

RMT

LINK

press and hold

...then press one of these.

To activate
the alternate modes...

ATTEN

MUTE

ON

VID

Repeat to exit the alternate mode.

DITHER

EXT SYNC

ALT - ATTEN
Mutes the outputs. Note that
the level meters still work. To
unmute, hold ALT and press
ATTEN again.

ALT - 4 CHAN
Activates output of a digital
sinewave at the AES ports.

ALT - DISPLAY
Activates remote mode/front
panel lockout. When acti-
vated, the 1dB SCALE and
DISPLAY LEDs flash and
front panel controls are
locked into their current set-
tings. To unlock, hold ALT
and press DISPLAY again.

ALT - LINK
Only active in 4-channel
mode. Activates a short tone
burst. See

Realigning Two

DAT Recordings.

ALT - ON
Reserved for future en-
hancements.

ALT - DITHER
Activates psychoacousti-
cally optimized noise shap-
ing. When activated, WIDE,
20BIT and HF will be lighted.

Note that this type of dither
can only be used in 2-chan-
nel mode; activating will dis-
able 4-channel mode and
compressor functions.

ALT - EXT SYNC

Enables the digital audio in-
put. See

Operating the 20/20

AD in the Digital Mode.

Advertising