Legend Audio ATP 7500 - Manual (Page 18)

Input Level 200mVrms
Output Level (Preamp) 3.5 Vrms
Input Impedance 15 k Ohms
Total Harmonic Distortion (Stereo Source) <0.03%
Total Harmonic Distortion (7.1 Channel Source) 0.003%
Frequency Response (Stereo Bypass Mode) 20Hz to 20kHz (±0.3 dB)
Stereo Analog Input Level 2 Vrms
Signal-to-Noise Ratio 98 dB CCIR-ARM
Digital Audio Inputs/Outputs 4 Coax, 2 Optical/1 Optical
Analog Audio Inputs/Outputs 8 RCA Pairs/2 RCA Pairs
7.1-Channel Audio Inputs/Outputs 1 Set RCA1/Set RCA
Video Inputs (Composite, S-Video, Component) 5, 7, 2
Video Outputs (Composite, S-Video, Component) 4, 3, 1
Second Zone Inputs and Outputs 1 Audio In/1 Variable & 1 Fixed Audio Out
Triggers 1 Main Zone, 1 Zone 2, 1 12V, 1 IR
AM/FM Tuner Yes
Voltage Automatic Setting 100 VAC to 240 VAC
Chassis Dimensions (W x H x D) Inches 17 x 5.75 x 12.5
Chassis Dimensions (W x H x D) Millimeters 431.8 x 146.1 x 317.5
Net Weight (lbs/kg) 24/10.91
Shipping Weight (lbs/kg) 32/14.55
The contents of this manual are Copyright © 2003 by Amplifier Technologies, Inc. and may not be duplicated or reproduced by any
means, whether physical, electronic or otherwise without prior written consent from Amplifier Technologies, Inc.
Specifications are those in effect at the time of printing. Amplifier Technologies, Inc.
reserves the right to change specifications or designs at any time without notice.
Crestron is a registered trademark of Crestron Electronics, Inc.
Dolby Digital is a registered trademark of Dolby Laboratories Licensing Corporation. “Dolby”, the “Double-D symbol,” “Dolby Digital”
and “Pro Logic” are trademarks of Dolby Laboratories Licensing Corporation.
“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theatre Systems, Inc.
Specifications
All Specifications refer to 1 Vrms and 0 dBf digital or 2 Vrms analog input, except when stated.
Page 18