Lexmark 2000-Sheet Drawer Optra T - Manual (Page 7)

2000-Sheet Drawer User’s Guide 1
Introduction
The 2000-sheet drawer gives your printer added capacity by
allowing you to load up to four reams (approximately 2,000 sheets)
of 20 lb paper.
Your drawer is pre-configured to either letter or A4 paper size. To
use a different paper size, see page 12.
Your printer has an autoconnect feature that recognizes when the
2000-sheet drawer has been installed. After starting your printer,
this option is shown as Tray 2, Tray 3, Tray 4 or Tray 5, depending
upon the number of installed paper sources.
To ensure reliable paper feeding, it is important that you select
paper recommended for use with the 2000-sheet drawer and that
you load it properly. See page 15 for information on paper
specifications and page 16 for loading instructions.
To ensure compatibility with your printer, verify your drawer is
labeled with a colored triangle located on the top left front corner.
Refer to your printer documentation for information pertaining to
electronic emissions, safety, and warranty.