Lexmark 2000-Sheet Drawer Optra T - Manual (Page 8)

2000-Sheet Drawer User’s Guide 2
Unpacking the 2000-Sheet Drawer
1
Remove all items shown in the illustration from the carton. If
any items are missing, contact the place where you bought
the 2000-sheet drawer.
Note: The 16 AWG power cord is included only with units
intended to operate at 100 - 127V power.
2
Remove all packing material and tape from each item.
Note: Save the carton and packing material in case you
need to repack the 2000-sheet drawer for service or
storage.
3
Peel the appropriately numbered decals from the sheet and
attach them to the recessed areas on the drawer. Choose
the number that corresponds to the number of paper
options you are attaching, including the standard output
tray.
Stabilizer feet
16 AWG power cord
Decals
2000-sheet drawer
Jumper cord
Printer compatibility label
(colored triangle)