Liebert FS-8704-02 - Manual (Page 12)

FS-8704-02_BacnetEthernet.doc Driver Manual Page 12 of 20
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
5.4. Server Side Map Descriptors
5.4.1. FieldServer Specific Map Descriptor Parameters
Column Title Function Legal Values
Map_Descriptor_Name
Name of this Map
Descriptor Up to 32 alphanumeric
characters
Data_Array_Name
Name of Data Array where
data is to be stored in the
FieldServer One of the Data Array
names from “Data Array”
section above
Data_Array_Offset
Starting location in Data
Array 0 to maximum specified in
“Data Array” section above
Function
Function of Server Map
Descriptor
Server
5.4.2. Driver Specific Map Descriptor Parameters
Column Title Function Legal Values
Node_Name
Name of Node to fetch
data from
One of the node names
specified in “Server Node
Descriptor” above
Data_Type Data type in PLC Note 2
Object_ID Address of the object 0, 1, 2, 3, …
Property
The object property to
read
Present value
Units The object units
See Error! Reference source
not found.
Data_Array_Low_Scale*
Scaling zero in Data
Array
-32767 to 32767, 0
Data_Array_High_Scale*
Scaling max in Data
Array
-32767 to 32767, 100
Node_Low_Scale*
Scaling zero in
Connected Node
-32767 to 32767, 0
Node_High_Scale*
Scaling max in
Connected Node
-32767 to 32767, 100
Active_Text 2
Specify the Active Text
property of the Object
Any legal BACnet ASCII string
Inactive_Text1
Specify the Inactive Text
property of the Object
Any legal BACnet ASCII string
Relinquish_Default1
Specify the startup
Relinquish_Default
Property value for this
Any legal BACnet ASCII string
Note 2
AI - ANALOG INPUT BV - BINARY_VALUE
AO - ANALOG_OUTPUT MI - MULTI_STATE_INPUT
AV - ANALOG_VALUE MO - MULTI_STATE_OUTPUT
BI - BINARY_INPUT MV - MULTI_STATE_VALUE
BO - BINARY_OUTPUT DI - DIGITAL_INPUT
DO - DIGITAL_OUTPUT
2
See the BACnet DFS to determine if a particular object supports this property