Lexmark MARKNET N8050 - Manual (Page 15)

Installing the printer on the network
11
Configuring WEP encryption
1 Enter the appropriate WEP key(s). WEP encryption requires at least one WEP key, but can
include up to four.
2 Select the default WEP transmit key.
3 Click OK to return to the Advanced Mode home screen, and proceed to step 8 of the
advanced mode instructions.
Configuring WPA Personal encryption
1 Enter the appropriate Pre-Shared key.
2 Click OK to return to the Advanced Mode home screen, and proceed to step 8 of the
advanced mode instructions.
Creating a certificate request
Some authentication mechanisms require certificates to work properly. In situations in which a
signed certificate is required, a certificate request must be initiated in order to create a new signed
certificate.
To create a certificate request
1 Go to Certificates Æ Create Certificate Request .
2 Enter the appropriate certificate information.
3 Click Browse to navigate to the location where the certificate is to be saved.
4 Click OK to return to the Advanced Mode home screen, and proceed to step 7 of the
advanced mode instructions.
Installing the printer on the network
Once the print server has been configured, use the printer drivers or printer software CD that came
with the printer to install the network printer on the network.
• Make sure that your printer drivers CD or printer software CD is inserted into the computer
you want to install the printer on.
• When installing the printer, follow the Suggested Æ Network installation path. This process
can vary between different printers.
For more information on installing the printer on the network, see the printer documentation.