Lanner electronic FW-7650 - Manual (Page 26)

Step 3: Press the latches into the notches of the RAM module.
How to Remove the Hard Disk Bay
Step 1: Open both latches of mobile rack by press it.
Step 2: Use two hands to pull out the mobile rack.
Step 3: Remove the mobile rack straight and smooth.
How to Remove the Hard Disk Bay
Step 1:
Use screwdriver to remove four screws on the cover
Step 2: Pick up the cover
Step 3: Connect the 44pin cable, and insert a 2.5” hard disk.
Step 4: Screw the 2.5” hard disk from the bottom of the mobile rack, you may find the four
screws within the packing.
Step 1 Step 2
Step 3 Step 4