Linksys PVC2300 - Manual (Page 5)

5
NOTE: Before attaching the camera extension or swivel head, the stand
base can be mounted in a permanent location by using three screws to
secure the stand base to the desired location .
The Camera stand can be
connected two different ways:
Attach the stand base to the
camera extension and attach the
camera extension to the swivel
head .
You can connect the swivel head
directly to the stand base if the
extension isn’t necessary .
Connect the camera stand to the
bottom of the camera . Adjust the
camera to the appropriate viewing
position .
Once the camera is positioned
properly, secure the camera in place
by tightening the locknut .
A.
B.
Stand Base
Camera Extension
Swivel Head
Locknut
OR
Stand Base
Swivel Head
Stand Base
Camera Extension
Swivel Head
Locknut
OR
Stand Base
Swivel Head
Installation 1�
Locknut