Linksys PVC2300 - Manual (Page 9)


Installation
The Wizard will now search for your
camera .
Once found highlight the camera
and click Next .
If the Camera you want is not
displayed in the Selection box, click
Search Again .
NOTE: The Camera defaults to
DHCP mode . If your network
doesn’t have a DHCP server or if
you are having issues obtaining
an IP address, you can assign a
static IP address to the Camera
by pressing the reset button
for less than 3 seconds . A static
IP address of 192.168.1.99 will
be assigned to the Camera .
WARNING: Pressing the reset button for 10 seconds will restore the
factory default settings, including setting the Camera to DHCP mode .
D.
Reset Button Reset Button