LSI SYM8953U - Manual (Page 21)

3.75 pc 10.25 pc 11.25 pc 38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
Detailed Installation Procedure 2-5
Figure 2.1 Hardware Connections for the SYM8953U Host Adapter
Step 7. Carefully insert edge connector J1 (see Figure 2.1 ) of the host
adapter into the PCI slot.
Make sure the edge connector is properly aligned before
pressing the board into place as shown in
Figure 2.2 . The
bracket around connector J3 should fit where you removed the
blank panel.
Note: You may notice that the components on a PCI host adapter
face the opposite way from non-PCI adapter boards you
have in your system. This orientation is correct. The board
is keyed and will only go in one way.
LED
Internal
External
SYM8953U
SCSI
Interface
J2
Connector
J4
SCSI
Interface
J3
J1 to PCI Mainboard