Lincoln Electric CV-400 User Manual
Page 2
1. Strain Relief for Terminal Strip Connection
2. Analog Amps & Volts Meters
3. Local / Remote Control Switch
4. Input Power On / Off Switch
5. Input Power Pilot Light
6. Output Voltage Control Knob
7. Circuit Breakers
8. Thermal Overload Light
9. Voltmeter Polarity Switch
10. 14 Pin MS Type Connector
A CLOSER LOOK
PERFORMANCE
FEATURES
QUALITY AND RELIABILITY
• Electronic and thermostatic protection from current overload or
excessive temperatures.
• Solid state circuitry provides extra long life during repetitive
applications.
• Three-year warranty on parts and labor.
• Manufactured under a quality system certified to ISO 9001
requirements and ISO 14001 environmental standards.
SYSTEM SELECTION
Ready-Pak
®
Packages
Take the hassle out of ordering. Order a Ready-Pak pre-assembled welding package.
CV-400
www.lincolnelectric.com
[2]
Shown: CV-400 / LF-72 Ready-Pak
TM
Package
CV-400 / LF-74 Ready-Pak Package
Order K2496-1
• CV-400 Power Source (K1346-13)
• LF-74 Bench Model, Heavy Duty
(Heavy Duty Wire Reel Stand)
• .045” Drive Rolls for Solid Wire
• Heavy Duty Wire Reel Stand
• Control Cable – 10 ft. (3.0m)
• Weld Power Cable – 10 ft. (3.0m)
• Work Clamp
• Magnum 400 MIG Gun with 15 ft. cable (4.5m)
• Harris Flowmeter Regulator and Gas Hose
CV-400 / LF-72 Ready-Pak Package
Order K2439-1
• CV-400 Power Source (K1346-13)
• LF-72 Bench Model, Heavy Duty
(Heavy Duty Wire Reel Stand)
• .035"-.045” Drive Rolls for Solid Wire
• Heavy Duty Wire Reel Stand
• Control Cable – 10 ft. (3.0m)
• Weld Power Cable – 10 ft. (3.0m)
• Work Clamp
• Magnum 400 MIG Gun with 15 ft. cable (4.5m)
• Harris Flowmeter Regulator and Gas Hose
• Provides line voltage compensation for maintaining weld
consistency, even with changes of ±10%.
• Full output control potentiometer lets operator accurately
regulate power levels.
• Excellent arc stability and weld consistency.
• Quick, simple 14-pin MS-type (amphenol) wire feeder connection.
• Low flat-top case can be placed under a workbench or stacked
on top of each other for smaller footprint.
• Remote control of output is possible via 14 pin connector on the
control panel or terminal strip connection.
• Thermal trip indicator light.
• “Cold” electrode with a solid state
contactor when the trigger is released for added safety.
Key Controls
1
2
8
7
5
3
4
9
10
6