Lincoln Electric SAM400 - Manual (Page 21)

C-1 ACCESSORIES C-1
K799 Hi-Freq™ - Provides high frequency plus a gas
valve for TIG welding. A water valve is available as an
option. Requires 115 volt AC input. Cannot be used
with optional meters connected, or in constant voltage
mode. (Limited to 250A - 60% Duty Cycle).
K802-D Power Plug Kit - For SAM welders with stan-
dard 2KVA of AC auxiliary power. Kit includes male
plugs for each auxiliary receptacle.
K805-1 Ether Start Kit - Injects ether for starting aid.
Recommended only when engines are frequently
started at temperatures under 10°F (-12°C). Ether
cylinder is not included.
K767-1 Undercarriage - A 4-wheel steerable under-
carriage for in-plant and yard towing
1 with E78-14 load
range (B) tubeless tires. Mounts directly to welder
base.
1 For highway use, consult applicable federal, state and local laws regarding
possible requirements for brakes, lights, fenders, etc.
Linc-Thaw™ - Includes meter and fuse to protect the
welder when thawing frozen water pipes. (L2964-[ ]
Specify SAM400 or SAM650)
K704(SAM400 only) Standard Accessory Kit -
Includes electrode and work cables, headshield, work
clamp and electrode holder.
K865(SAM400 only) Engine Hour Meter Kit -
(Standard on K1279-1). Keeps track of how long
engine has been operated. Useful for following recom-
mended maintenance schedules on machine.
SAM400 & 650