Line 6 Flextone Cab 212S - Manual (Page 3)

SERIAL NO:
Y OU SHOULD READ THESE I MPORTANT S AFETY I NSTRUCTIONS
K EEP THESE INSTRUCTIONS IN A SAFE PLACE
The serial number can be found on the Flextone back
panel. Please note it here for future reference:
This equipment is UL listed (file no. E174693) for
UL 6500 and CAN/CSA-E65-94 safety standards.
CAUTION:
To reduce the risk of fire or electric shock,
do not remove screws. No user-serviceable parts inside. Refer
servicing to qualified service personnel.
The lightning symbol within a triangle means
“electrical caution!” It indicates the presence
of information about operating voltage and
potential risks of electrical shock. The exclamation point within a
triangle means “caution!” Please
read the information next to all
caution signs.
Flextone User’s Manual, Version 1.1 ©1998, Fast Forward Designs, Inc., manufacturers of Line 6 brand products. Line 6, Flextone, Floor Board,
FB4, and TubeTone are trademarks of Fast Forward Designs, Inc. All other product trademarks are property of their respective owners.
Before using your Flextone, be sure to carefully read the applicable
items of these operating instructions and the safety suggestions.
1. Obey all warnings on the amp and in the Flextone Manual.
2. The heat sinks on the back of the Flextone HD can get hot! Do not touch during operation or shortly after.
2. Do not place near heat sources, such as radiators, heat registers, or appliances which produce
heat. Keep the rear of the unit at least 3 inches from walls or other items that might block heat radiation.
3. Do not block any of the ventilation openings or use in an enclosed space.
4. Guard against objects or liquids entering the enclosure.
5. Connect only to AC power outlets rated 100-120V or 200-240V 47-63Hz (depending on the voltage range of the
unit; refer to the back panel). Current ratings should be a minimum of 5A for the 120V range and 2.5A for the
240V range.
6. Do not step on power cords. Do not place items on top of power cords so that they are pinched or leaned on. Pay
particular attention to the cord at the plug end and the point where it connects to the amp.
7. Unplug the amp when not in use for extended periods of time.
8. Do not perform service operations beyond those described in the Flextone Manual. In the following circumstances,
repairs should be performed only by qualified service personnel:
•liquid is spilled into the unit
•an object falls into the unit
•the unit does not operate normally or changes in performance in a significant way
•the fuse is blown
•the unit is dropped or the enclosure is damaged
9. Prolonged listening at high volume levels may cause irreparable hearing loss and/or damage. Always be sure to
practice “safe listening.”
WARNING:
To reduce the risk of fire or
electric shock, do not expose this appliance to
rain or moisture.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Flextone Manual Rev E; bookfile Page 3 Tuesday, September 8, 1998 10:31 AM