Line 6 Flextone Cab 212S - Manual (Page 38)

T HAT ’ S U SING Y OUR F EET : U SING THE FB4 WITH THE F LEXTONE
6 • 8
U SING THE FB4 WITH THE F LEXTONE
The FB4 gives you basic control over channel switching on the Flextone. We
tried to make it as simple as possible. Turn off the Flextone. Connect the FB4 to
the Flextone with the thoughtfully-included connection cable. Turn on the
Flextone. Select Sound A, B, C, or D by pressing the appropriate button on the
FB4. The LED will light to indicate that the channel is selected. If you press and
hold down the button at the lit LED for about a second, your Flextone will switch
to Manual Mode. If you tap the button at the lit LED two (or more) times, it will
set the Tap Tempo speed. And finally, if you unplug the FB4 from your amp and
tap on one of its switches, nothing will happen.
Note: For those aware of the extra banks of sounds accessible via the Floor Board, you’ll
want to know that the FB4 is always selecting sounds from User Bank 1 – the same four
channels that are accessible from the Flextone itself.
Flextone Manual Rev E; bookfile Page 38 Tuesday, September 8, 1998 10:31 AM